- Input voltage: DC 11-18.0V
- charge power: max.50W
- Discharge power: max.5W
- Discharge current range: 0.1~1.0A
- Charge current range: 0.1-5.0A
- Current drain for balancing LiPo: 300mAh/cell
- Data store: max.5 data of batteries
- NiCd/NiMH battery cell count: 1 - 15cells
- LiPo/LiLo/LiFe battery cell count: 1 - 6cells
- Pb battery voltage: 2V~20V
This is the First Turn Racing Battery
Manager/Charger, which offers all-in-one charging, discharging, and
balancing for not just LiPo's but Ni-CD, Ni-MH, Li-Ion, Li-Fe, and even
PB (lead acid) batteries. This charger uses
a unique individual cell voltage balancer, which means that an external
balancer when charging LiPo's is not required.
Other features include delta-peak detection, fast charge mode, auto
charge current limit, capacity limit, 5-slot data storage/recall, temp
monitoring, cycling, LCD display, and touch pad keyboard. You can also
manage your packs with a PC through the optional USB interface cable
The First Turn Racing charger features an AUTO function that sets the
current during the process of charging or discharging. Especially for
Lithium batteries, it can prevent the overcharging which may lead to an
explosion due to the user's incorrect setting. The First Turn Racing
charger can disconnect the circuit automatically and alarm once
detecting any malfunction.
The First Turn Racing charger employs an individual-cell-voltage
balancer. It isn't necessary to connect an external balancer for balance
charging. During the process of discharging, the First Turn Racing
charger can monitor and balance each cell of the battery pack
individually. Error messages will be indicated and the process will be
ended automatically if the voltage of any single one cell is abnormal.
The First Turn Racing charger is adaptable to various types of Lithium
batteries, such as Li-ion, Li Po and the new Li-Fe series of batteries.
It has fast and storage modes for lithium batteries. 'Fast' charge
reduces the duration of charging, while 'Store' state can control the
final voltage of your battery, to store for a long time and protect
useful life time of the battery.
Charges, Discharges and Balances
For Li-Po, Ni-CD, Ni-MH, Li-Ion and PB Batteries
AC Power Supply Built In
Touch Pad Keyboard
The automatic charge termination program based on the principle of the
Delta-peak voltage detection. When the battery's voltage exceeds the
threshold, the process will be terminated automatically.
Automatic charging current limit
You can set up the upper limit of the charging current when charging
your Ni-Cd or Ni-MH battery; especially useful for Ni-MH batteries of
low impedance and capacity whenusing the 'AUTO' charging mode.
The charging capacity is always calculated as the charging current
multiplied by time. If the charging capacity exceeds the limit, the
process will be terminated automatically when you set the maximum value.
Temperature threshold (* Function available with
optional temperature probe, which is not included.)
The battery's internal chemical reaction will cause the temperature of
the battery to rise. If the temperature limit is reached, the process
will be terminated.
A maximum of five batteries' data can be stored for users' convenience.
You can keep the data pertaining to program setting of the battery of
continuous charging or discharging. Users can call out this data at any
time without any special program setting.
1 to 5 cyclic and continuous process of charge>discharge or
discharge>charge for battery refreshing and balancing to stimulate the