Experience the
new era of the tire truing technology
If you are
looking for an easy and tough tire truer, the all new HARD TT3 will
satisfied all your demand. The advanced liner guide system and
powerful motor will take your game into higher level.
The basic idea of a great tire truer is easy to handle and have a
strong motor which is not easy to breakdown and great torsion
strength. Therefore, we made the motor of TT3 pretty tough and
stable in order to deal with the truing process.
The liner guide system is well known as the easy, precision, and
convenient system that has been used in many manufacture industries.
Drivers basically operating the truer on a stainless track rail
which has great accuracy and low wearing function. You will find out
it is easier to control when you’re sliding the truer because it has
a roller that installed between the truer and track rail
consistently and smoothly. H.A.R.D TT3 is the first one that
combined the liner guide system with the tire truer, so it is
absolutely unique than other tire truer products that you can get on
the market.
The camber is another component to adjust the angle of tires, so we
developed the adjustable camber for different angle demands, and
drivers will easy to see the reading on the laser engraved scale.
TT3 tire truer supporting 1/8, 1/10, 1/12 tires (not including the
wheel adapters)
H1040-TT3........................... 215.00 Euros
H1042 - 1/8
ADAPTOR ....... 21.00 Euros
H1043 - 1/10
ADAPTOR ..... 16.00 Euros
H1044 - 1/12
ADAPTOR ..... 19.00 Euros
The TT3 is the
definition of the new generation tire truer, it features
convenience, quickness and toughness. The new liner guide system
replaced the traditional tire truer track by using the stainless
track rail which makes you to move the truer easily by one hand.
Não
inclui saco de emissora lateral - vendido em separado
CAIXA
DE ARRUMAÇÃO E BASE DE SUPORTE
PREÇO : 12.00 Euros
REF: H9201
SACO PARA
TRANSPORTE DE CARRO 1/10
PREÇO : 65.00 Euros
REF: H8921A
SACO PARA
TRANSPORTE DE EMISSORA (RÁDIO ) E CARRO 1/8
PREÇO : 95.00 Euros
REF: H8911
SACO PARA
TRANSPORTE DE EMISSORA (RÁDIO )
PREÇO : 38.00 Euros
REF: H8905
KIT DE PEÇAS
PARA AFINAÇÃO DE CARROS ESCALA 1/8 T.T. E RALLY
PREÇO : 230.00 Euros
REF: H7105
Daniele Ielasi (1/10 200mm IFMAR
World Champion) with H6 starter box
We are glad to announce Daniele Ielasi uses H6 Starter Box of
H.A.R.D. Racing product.
Professional driver’s choice : H6 Starter Box On
Road
REF:
H6516 Preço : 125.00 Euros
Preço : 22.00 Euros
For those of you with only 2 hands, H.A.R.D.
gives you a third hand solution… the H9010 Neck Strap.
Designed
with the same high quality as all of our tools and equipment, the
H.A.R.D. multi-purpose neck strap can hook-up just about anything
you need to hang around.
Perfect
for transmitters, cameras, stopwatches, your mobile phone, ID cards
and keys… or even just to wear in case you need it while upgrading
your coolness factor in the process.
It’s
durable and tear resistant, yet comfortable and comes in two colors
imprinted with our logo. The dependable safety clasp attaches just
about anything securely, while the strap length can be easily
adjusted longer or shorter as desired.
So for all your favorite things, stay
connected with the H.A.R.D. H9010 Neck Strap
World First Dual Mode Speed Controller Preço : 65.00 Euros
?
Dual
Mode
The H6804 ESC has two setup modes:
· Gentle Mode with Yellow Indication Light
(50% output)
· Fierce Mode with Red Indication Light (100%
output)
The two modes allow you to “dial-in” your car
for high speed or low speed racing, depending on your racing skill.
three
position available
Gentle
Mode
If you are a
beginner and just learning how to race, use the Gentle Mode to give
you a smooth, even throttle response with limited speed. This mode
is good for children or those not experienced enough to handle high
speed racing. It helps to keep you on the track and off the wall.
Two mode available
Fierce
Mode
With the touch of a button you can go
from Gentle Mode to Fierce Mode using the full potential of your
stock motor at 100% power. This mode is for experienced racers who
know how to navigate at high speeds and blow away the competition.
The H6804 ESC is powerful and versatile, yet with low weight and a
small footprint to allow easy mounting on your vehicle.
Fierce
Mode Red Light
Quality
Construction
As with all H.A.R.D. products, durable
construction and high quality materials come standard on the H6084
Dual Mode ESC. Its unique design sets it apart from every other ESC
out there.
The high impact outer casing protects the
inner components and has three optional switch mount locations.
Motor and receiver connectors are gold plated for optimal
conductivity.
So if you want the ultimate stock motor ESC,
pickup the H6084 JR Dual Mode ESC with reverse. The precision and
quality you will find at such an affordable price simply can’t be
beat. Leading the competition in controlling speed has never been so
easy… that’s because it’s H.A.R.D.
From the company that brings you the best in
RC equipment and accessories, H.A.R.D. has done it again with our
new X3 stock electric motor.
Engineered to exceed the standard performance
of other kit motors, the X3 540 size stock motor was created to
provide unmatched power right out of the box. With design features
not usually found on stock “can” motors, you get the most
state-of-the-art power plant for your stock kit.
H6805 X3
motor
Speed
Enhanced
The X3 laps the competition, boasting a beefy
19 turn armature… much faster the than the generic motors found in
other kits. The X3 takes full advantage of your battery pack, giving
you that extra punch when you hit the throttle. You’ll notice the
speed with power to spare immediately, that’s the edge you always
get when you’re racing H.A.R.D.!
Performance
Enhanced
More power plus more speed equals heat. Heat is
the enemy of every RC motor. Stock can motors are notorious for heat
build up because there is no heat sink endbell. That’s why H.A.R.D.
doesn’t leave engineering to chance.
Cooling fan - good working effectively
Built-in to very X3 stock motor is an internal
cooling fan ! An ingenious design that cools the motor from within
as it runs, giving you more power longer than most stock motors.
So… “What’s in your can”? If it's H.A.R.D.
engineering you have the best stock motor for your ride. Get the X3
and join the revolution.
Internal
cooling fan
Recommended
Accessories
Power your X3 with the H6601 H.A.R.D. 7.2v
4200mah NiMH Stick Pack , H6602 H.A.R.D. 7.2v 3300mah NiMH Stick
Pack and H6603 H.A.R.D. King Selected 4600mah NiMH Intellect Cell .
A perfect match for the enhanced power of your X3 stock motor.
Control all that speed with the H6804 H.A.R.D.
JR Dual Mode ESC (w/reverse). Designed specifically for stock motors
this ESC and the X3 are a winning combination.
The H6805 H.A.R.D. X3 Motor is adopted by Team
Magic E4JR RTR 1/10 touring car already.
Please be careful the place of “+” “-“
Maintenance
Use a good quality bearing oil to oil the
internal bushings inside the can and at the endbell. Using bearing oil to
maintain the X3 motor
As with all motors the
X3 will become hot to the touch after running. Please allow the
motor to cool sufficiently before touching the can exterior.
H6652: PACK 5 em linha - 1500MAH- 6.00 Volts ( recarregável )
PREÇO : 24.00 Euros
As you know, HARD is not yet among the famous battery
brands at the market, but we do something that these famous brands don't
do. Each HARD receiver battery pack is examined by this industry's highest
standard Competition Electronics Turbo 35 GFX charger to make sure that each
pack can generate the best performance. In addition to the unique test
procedure, there are many special features applied on these packs as well.
Let's check how best these HARD receiver battery packs are.
Long
run time
Compared with the traditional 600mAh receiver battery
pack, this 6v 1500mAh pack offers at least 250% more run time for you at a
light weight. Although recent digital servos tend to draw more power than
before, with this capacity, it's no problem to run the pack in a long 60
minutes final or even longer. To make sure each HARD receiver battery pack
can meet the demand, we do use Competition Electronics Turbo 35 GFX to
examine each pack. Several days are required to check every pack because
the pack needs to go through several testing stages. It's not an easy task
to run this procedure, but it does help us to offer the best receiver
battery pack at the market.
High
quality wire and connector
To make the HARD receiver battery pack the most
reliable pack at the market, we choose the best battery cell, wire and
connector to build the pack. The wire we use is Grey/Orange extra-soft 20
gauge wire. The wire is thicker and softer than the one used on other
brands. Also, we also have the metal plug gold plated to have the best
efficiency. Universal type of connector is used on the pack. It's no
problem to use the connector on the new Futaba, KO and Sanwa (Airtronics)
receivers. To suit the Sanwa (Airtronics) receiver, our connector also has
special edges for easy installation. Fine wire, plug and connector are not
large items, but you can easily find out that we are doing our best to make
every part as perfect as possible.
When you get HARD receiver battery packs, you can
easily see our intention to make them as good as possible. Though they are
not as expensive as matched batteries used on electric cars, we do treat as
important as matched batteries. They are very important for gas car racers
when in competition. Performance and reliability are what we try to support
you.
Usage:
We suggest that 1A charge current can be used to charge the receiver battery
pack. When the battery is new, it may take few times usage to reach the
best capacity and performance. Please always have the battery charged when
you plan to store it for a long time.
ABASTECEDOR
SPEED 500cc
REF: H1036
PREÇO : 15.00 Euros
««««Clicar na imagem para ver pormenores
The
H.A.R.D. Racing fuel bottle is made from a soft and
pliable material. This material makes it easy to control
the amount, and speed, of fuel delivered to your nitro
vehicle. The performance of the fuel bottle was the main
design goal for the team, so even though this material
has all the qualities required for a high performance
fuel bottle, the bottle itself can not be printed on
like the regular plastic bottles can. We have chosen to
compromise on the placement of our logo – NOT on the
performance of our product. Let's take a look on its
stunning feature!
The
H.A.R.D. Racing fuel bottle is made from a soft and
pliable material. This material makes it easy to control
the amount, and speed, of fuel delivered to your nitro
vehicle. Fuel bottles made from firm plastic make it
almost impossible to precisely control the fuel flow and
often result in overfilling or spillages. These
spillages can become a hazard for the expensive
electronics installed in your RC vehicle. The material
we use is also very elastic. This has the advantage of
enabling fast fill-ups as well as returning very quickly
to its original shape, preventing the spillage of fuel.
The performance of the fuel bottle was the main design
goal for the team, so even though this material has all
the qualities required for a high performance fuel
bottle, the bottle itself can not be printed on like the
regular plastic bottles can. We have chosen to
compromise on the placement of our logo – NOT on the
performance of our product.
Included
with this fuel bottle is our new black fuel bottle cap
holder. The holder is designed to keep the fuel bottle
cap secure while you are refuelling, and mounts
conveniently on the neck of the fuel bottle. It can be
frustrating at times to try and find the fuel bottle cap
when you return to the pits from racing or you just want
to keep the fuel bottle sealed to prevent dirt and dust
getting into your fuel. Having the fuel bottle cap
handily stored on the fuel bottle makes this issue a
thing of the past. It is a simple, yet clever design and
one you will appreciate on race day. This cap holder can
also be used on other fuel bottles since it is
removable. See the link below for the item number to add
this handy product to your other fuel bottles.
The
smoke color of our fuel bottle makes the volume markings
on the bottle very clear and easy to read. The special
material the bottle is made from will resist staining
for a long period of time. The green fuel bottle cap and
the black fuel bottle cap mount ensure you recognize
this product as another performance item from H.A.R.D.
Racing. Our products are designed to not only look good,
but most importantly, they must meet our expectations of
reliability and performance.
MESA DE ARRANQUE
( STARTER )
COMPATIVEL
COM TODAS AS ESCALAS T.T. e PISTA
REF: H6502
PREÇO : 130.00 Euros
««««Clicar na imagem para ver pormenores
KIT PARA AFINÇÃO DE SET
UPS DE CARROS ESCALA 1/10
REF: H7101
PREÇO: 115.00 Euros
REF: H7103
PREÇO: 100.00 Euros
««««Clicar na imagem para ver pormenores
MALA DE
TRANSPORTE
IDEAL
PARA ESCALA 1/10
REF: H9021
PREÇO : 70.00
Euros
SACO DE ALTA QUALIDADE
PARA TRANSPORTE DE EMISSORA
REF: H9005
Preço : 28.00 Euros
««««Clicar na imagem para ver pormenores
CONJUNTO DE CHAVES EM CARBONO
COM BOLSA p/ 10 CHAVES
( 1.5 / 2.0 / 2.5 mm )
REF: H1051
Preço : 58.00 Euros
REF:
9001( Só bolsa )
Preço : 35.00 Euros
Envie um e-mail para
comercial.topcar
para qualquer questão ou comentário relacionado com esta página.
Preço : 22.00 Euros
Preço :
30.00 Euros
