TITAN/BLITZ PRODUTOS

53001 Gas Cooler Special design, 0 radiador de gases de escape é montado entre o escape e o depósito para eliminar parte do calor dos gases de escape que entram no depósito, diminuindo assim a temperatura do combustível e consequentemente o consumo. Para motores 1/8 e 1/10 . Em alguns casos um deposito de combustivel pode aumentar o tempo de abastecimento em mais de 1 minuto.

Ref: 53001...... Preço: 25.00 Euros

TiTAN Furador de carroçerias

Produzido em aço carbono com um tratamento térmico fura as carroçerias em forma circular perfeita.

Tampa em aluminio para proteger a ferramenta e o utilizador.

Será o melhor furador para fazer uma carroçeria perfeita.

Ref: 12700.... Preço: 23.50 Euros

CHAVE DE VELAS ESPECIAL SUPER ENDURECIDA

(8.00/10.00/5.00mm )

Preço: 20.00 Euros

# 16000 Drive Shaft Replacement Tool

Preço: 65.00 Euros

· Design for most 1/8 and 1/10 On/ OFF road drive shaft with 3mm Pin.

· Easy and Fast to replace drive shaft pin with this tool and hammer.

· Drive shaft pin not included.

· Please read instruction before you use this tool.

· User Instruction Download Here.

Accessory

#16098 3mmX9.8mm SUJ2 Pin 10Pcs(1/10th On-Road) ....... 8.00 Euros
#16118 3mmX11.8mm SUJ2 Pin 10pcs(1/8th On-Road)........... 8.00 Euros
#16138 3mmX13.8mm SUJ2 Pin 10pcs(1/8th Off-Road) .......... 8.00 Euros

CHAVES HEXAGONAIS

1.5/2.0/2.5/3.0 mm com cabo de 1/4" de plástico com a mesma qualidade, precisão e durabilidade

REF: 15100

PREÇO CONJ: 26.00 Euros

#10001 TiTAN mala de ferramenta (sem chaves )

compact size 19cm X 28cm

Ref: 10001 .... Preço: 25.00 Euros

Com ferramenta :

Ref: 10002 ..... Preço: 165.00 Euros

( o valor em peças separadas ronda os 290.00 Euros )

#12700 Fura carroçerias 16mm.......................................... 23.50 Euros
#12030 3.0mm Hex chave ................................................ 12.00 Euros
#12325 2.5mm Bola Hex chave......................................... 12.50 Euros
#12025 2.5mm Hex chave................................................. 12.00 Euros
#11101 molas /Caster Clip chave ...................................... 12.00 Euros
#11320 2.0mm Bola Hex chave.......................................... 12.50 Euros
#11020 2.0mm Hex chave................................................. 12.00 Euros
#11015 1.5mm Hex chave................................................. 12.00 Euros




¡@ New TiTAN Setup Station II , Item number 30101. Setup Station II include 2pcs camber gauge , 2pcs setup wheel , 1pc ton gauge , 4pcs setup nuts. Camber gauge link with ball bearing which can provide ultra smooth in operation. Made by CNC machine with high precision. Easy for assemble by setup nut. Setup Station was base on 63.5mm wheel diameter, ride height will be same as rubber tire. Setup wheel based on 0mm Offset ,easy for you to seup track wedith and chassi tweak. Setup board #30300430 not include. Simply the Best Setup tool for E/P and G/P Touring Car . PREÇO: 130.00 Euros

Setup Board 1/10 #30300430 1/8 #30340540

#30300430

1.Fit for 1/10 Touring car setup
2.30cm X 43cm X 1.9cm
3.Perfect flat with double side water resistant

PREÇO : 38.00 Euros

#30340540

1.Fir for 1/8 on-road car setup
2.34cm X 54cm X 1.9cm
3.Double side water-resistant

PREÇO : 45..00 Euros

Ride Height Gauge

#30010002

1.Precise car ride height measurement tool
2.Stair step design, easy and clear!
3.Hard coated surface for long last usage

PREÇO : 13.00 Euros

#30010003

1.Precise car ride height measurement tool
2.Stair step design, easy and clear!
3.Hard coated surface for long last usage

PREÇO : 25.00 Euros

FERRAMENTA ESPECIAL

PARA 1/8 TT E RALLY GAME

- PARA FLY WHEEL

- PARA RODAS HEX 17

REF: 15001

PREÇO: 25.00 Euros

CARROCERIA

ROCK CRAWLER 1/10

Torna o seu carro com um olhar unico

Para AXIAL AX-10 e Rock Crawler electrico

Lexan resistente e com bastante elasticidade para o seu rock crawling.

Inclui tapa vidros e decalques

REF: 60801

PREÇO:22.00 Euros

	CARROCERIA DE 1/8 T.T. PARA Xray XB808 Design for Xray XB808 buggy , Item Number #60508-10 Higher and Forward cab to give more front down-force then original. Open and lower rear roof give Engine heat sink head more space to cooling. Made from High quality Polycarbonate Clear Un painted bodyshell included window mask and Decal Ref: 60508 Preço : 17.00 Euros

CARROCERIA DE 1/8 T.T.

PARA MUGEN MBX5 e Xray XB-8

New aerodynamic stylish buggy body shelland give your engine extra space for cooling.

Thickness 1.0mm , highly durability.

With Window mask and sticker.

Ref: 60505 Preço : 17.00 Euros

CARROCERIA DE 1/8 T.T.

PARA ASSOCIETED RC8 e RC8B

Low profile edge and side wing design give more down force for Chassis.

Made with 1.5mm Polycarbonate with protect film for painting.

Clear body-shell with Window Mask and Decal.

Ref: 60507 Preço : 17.00 Euros

CARROCERIA DE 1/8 T.T.

PARA TEAM LOSI 8IGHT

Permite dar mais tracção e melhor arrefecimento ao motor devido a mais espaço livre na traseira.

Pode ser usada com motor a combustão e tambem com motor electrico .

Inclui tapa vidros e decalques

REF: 60506

PREÇO:17.00 Euros

CARROCERIA DE 1/8 T.T.

-Design aerodinamico para maior estabilidade em recta , curva e saltos.

-Com mais 40% de capacidade de arrefecimento do motor

- Melhor identicação do carro

- Elaborado com a melhor qualidade de lexan

- Mantem o aleron traseiro limpo com o fluxo de ar

- Compativél com Kyosho MP777 SP2 , Hongor X1-CR e outros

REF: 60503

PREÇO:17.00 Euros

CARROCERIA DE 1/8 T.T.

-Design aerodinamico para maior estabilidade em recta , curva e saltos.

-Melhor arrefecimento do motor

- Melhor identicação do carro

- Elaborado com a melhor qualidade de lexan

- Mantem o aleron traseiro limpo com o fluxo de ar

- Compativél com Mugen MBX-5, Xray XB8, Hong Nor X1-CR e outros

REF: 60502

PREÇO:17.00 Euros

1/8 On-Road Racing Body shell

BLITZ LOLA R09 #60407 2009 IFMAR World Champion Racing Bodyshell

09 IFMAR World Champion Racing Body-shell.

Latest Design for modern 1/8 Racing Chassis which have higher rear body tower , provide the better rear down force for new design 1/8 On-Road Chassis.

We add 2 small wings in each side of front to create better reaction and down force in LOLA R09

Each Body shell included Side Support , option 1/8 wing set not included.

PREÇO : 28.00 Euros

( inclui pintura conforme imagens em baixo )


REF: 60407SG	REF: 60407-SR	REF: 60407SY	REF: 60407-SP

1/8 On-Road Racing Body shell
BLITZ LOLA T530-EVO3 #60403E EFRA 31491

¡@

New design for MRX4 and others 1/8 ON-ROAD to avoid fornt upper arm touch bodyshell.
Bodyshell hole mark for you to easy locate the position of bodyshell.
Driver seat move forward to keep re fuel easy and quick .
Rear side support with new sharp for better flow and support.
With all new design can bring you best handling for any track.
Strong and light as usual as BLITZ LOLA before.
More down force in both front / rear , provide maxim traction.
Item number #60403

PREÇO : 24.00 Euros

200mm G/P Touring car racing body shell

1. Made by high density 0.8mm lexan, light and strong.

2. Includes decal sheet and Wing
3. Come with 2 cut ling for adjust head down force .

PREÇO : 21.00 Euros

#60112 BLITZ RS4 (200mm) EFRA2036

RS4 body shell designed very well balance characteristic.
Easy drive and well stability with good steering is our target of our RS4
RS4 give very well handling with most model 1/10 200mm chassis in "basic" setup.

You can also expect RS4 give you all new experience in same car with consist and
better lap time.

Big size adjustable wing had 2 cut line, original wing give more down force which
give car more stability but it also make car little under steering.
we recommend small wing for professional drivers.

Adjustable rear wing give you easy to adjust rear down force with one coin
in few second , when track grip was changed you can easy to find your
best setup by change rear down force with our new design rear wing.

EFRA Homologated with EFRA 2036 , race approved for all EFRA and IFMAR race
　　

Clear body-shell with Decal and Window mask and plastic wing screw 60302-1 included.
Made from high quality polycarbonate with protect film for painting.
Fits most 1/10 On-Road Touring car Chassis with pre mark body tower hole.
Fast Adjustable rear wing.

Preço: 23.00 Euros

#60111 BLITZ ISF 2.0 (200mm) EFRA2037

#60111 BLITZ ISF 2.0
We give more down force into ISF2.0 make it got well steering and stability, low profile hood
and roof bring less drag effect of body-shell.

Because most 1/10 touring car need to open front side window to make car easy to hang
during re-fuel and it also give engine more cooling.
Special design windscreen and roof shape will eliminate turbulence of open side window.

Adjustable rear wing give you easy to adjust rear down force with one coin
in few second , when track grip was changed you can easy to find your
best setup by change rear down force with our new design rear wing.

EFRA Homologated with EFRA 2037 , race approved for all EFRA and IFMAR race

Clear body shell with Decal and Window mask and plastic wing screw 60302-1 included.
Made from high quality polycarbonate with protect film for painting.
Fits most 1/10 On-Road Touring car Chassis with pre mark body tower hole.
Fast Adjustable rear wing.

Preço: 23.00 Euros

Specification

#60109 BLITZ Altis 2.3, heritance of Altis 2.0 Racing performance.
Body shell width 201.5mm , quick response for corner and sweep turning.
Smaller roof and cockpit , smaller drag effect during high speed.
Sell without painting.
2 Stage Window mask and Decal included.

EFRA Homologated with EFRA 2027 , EFRA / IFMAR Race ready

Preço: 23.00 Euros

Specification:

1. Fit all 203mm Nitro touring car

2. Balance handling for High speed course with high corner speed.

3. Made by high density lexan, light and strong.

4. Includes decal sheet, window mask, and mounting hardware

5. EFRA 2020

PREÇO : 22.00 Euros

Specification:

1. Fit all 200mm Nitro touring car

2. Balance handling for High speed course with high corner speed.

3. Made by high density lexan, light and strong.

4. Includes decal sheet, window mask, and mounting hardware
5. Come with 2 cut ling for adjust head down force .

EFRA 2019

PREÇO : 22.00 Euros

Specification:

1. Fit all 200mm Nitro touring car

2. Excellent for High speed course with high corner speed.

3. Made by high density lexan, light and strong.

4. Includes decal sheet, window mask, and mounting hardwares

PREÇO : 21.00 Euros

Specification:

1. Fit all 200mm Nitro touring car

2. Excellent for technical course and tight cornering

3. Fit with IFMAR and EFRA technical specification

4. Made by high density lexan, light and strong

5. Includes decal sheet, window mask, and mounting hardwares

PREÇO : 21.00 Euros

SPECIFICATION:
1.Fit all 200mm Nitro touring car.
2.Excellent for mid-large track, provide high speed cornering
3.Fit with IFMAR and EFRA technical specification
4.Made by high density lexan, light and strong.
5.Includes decal sheet, window mask, and mounting hardware.

EFRA 2018

PREÇO : 22.00 Euros

STRATUS II

SPECIFICATION:
1.Fit all 200mm Nitro touring car.
2.Good handling for high speed and corner.
3.Fit with IFMAR and EFRA technical specification
4.Made by high density lexan, light and strong.
5. Includes decal sheet, window mask, and mounting hardware.

PREÇO : 21.00 Euros

SPECIFICATION:
1.Fit with IFMAR and EFRA technical specification
2.Fit for 200mm Nitro touring car.
3.High down force for low traction track
4.Made by high density lexan, light and strong.
5. Includes decal sheet, window mask, and mounting hardware.

PREÇO : 21.00 Euros

190mm E/P Touring car racing body shell

BLTIZ ALTIS 1.9 # 60208 190mm E/P Racing Bodyshell

Following Stylish Altis 2.0 with smaller roof , shorter and all new front bumper.
Made by 0.7mm material , more light and provide better handling.
Body and wing specification following IFMAR Rule.
Sell only Clear body with wing and sticker , windowmask .
Width 195mm length 420mm.

Preço: 22.00 Euros

SPECIFICATION:
1.Fit with IFMAR and EFRA technical specification.
2.Fit for 190mm electrical touring car.
3.For high-speed track with good handling.
4.Made by high density lexan, light and strong.
5. Includes decal sheet, window mask, and mounting hardware.

PREÇO : 20.00 Euros

All Stratus II body shell come with 3th wing stand, provide high-speed handling.

STRATUS II

PREÇO : 20.00 Euros

All Alfa body shell come with 3th wing stand ,provide high-speed handling

SPECIFICATION:
1.Fit with IFMAR and EFRA technical specification
2.Fit for 190mm electrical touring car.
3.For high-speed track with good handling.
4.Made by high density lexan, light and strong.
5.Includes decal sheet, window mask, and mounting hardware.

PREÇO : 20.00 Euros

Optional Wings

Specification:

- Comes in 2 different sizes, 190mm and 200mm.

- Smoother air flow, provides better stability.

- Fit any Blitz 1/10 Touring car bodies.　

note: our optional wings are made with transparent lexan material

PREÇO : 8.50 Euros

Optional Wing

Original Wing

#60302 BLITZ 1/8th Rear Wing Set

Pre-Cut 2pcs wing set .
Type I is special design for give 1/8th On-Road Racing Car ultra down force ,Type II can reduce the turbulence form engine INS-BOX and Heat sink Head.
Made by 1.0mm Material , strong as other wing in market.
Plastic Screw for fix wing not included.
Type I is perfect for use in Our Lola05 body shell.
Type II is Design base on Lola06 and many other body shell in market.
User can adjust height of Type I wing to reduce down force
Large surface to provide extra structure for body shell rear end.

PREÇO : 9.00 Euros

Exhaust Seal

#20050001

Specification:
1.Color: clear
2.Perfect fit for Nova/ RB / OS / STS / Sirio .12 Rear exhaust engine.
3.Durable and resistant for High-temp

PREÇO : 8.00 Euros (4 unid. )

#20050002

Specification:
1.Color: clear
2.Perfect fit for Nova/ RB / OS / Sirio all .21 Rear exhaust engine.
3.Durable and resistant for High-temp

PREÇO : 8.00 Euros (4 unid. )

#20504

Specification:
1.Color: Clear / Black
2.Perfect fit for PICCO .21 Rear exhaust engine.
3.Durable and resistant for High-temp

PREÇO : 8.00 Euros (4 unid. )

#20503

Specification:
1.Color: Clear / Black
2.Perfect fit for PICCO .12 Rear exhaust engine.
3.Durable and resistant for High-temp

PREÇO : 8.00 Euros (4 unid. )

COLAS

#20010001

CA Glue (Rubber tire)

Fast dry CA. Best result when using it on rubber tires.

Preço: 6.00 Euros

#20010002

CA Glue (Foam tire)

Best result when using it on foam tires

Preço: 6.00 Euros

#20010003

CA Glue (NORMAL USE

Preço: 6.00 Euros

LIQUIDOS PARA FIXAÇÃO DE PARAFUSOS

Liquido fixador de parafusos

( uso extra forte )

20Gr.

Preço: 6.00 Euros

Liquido fixador de parafusos

( uso normal )

20Gr.

Preço: 6.00 Euros

OLEO FILTRO AR ( 80C.C ) GRANDE EMBALAGEM

REF: 20600............... PREÇO: 12.00 Euros

Air Clean

#20605

Racing Air Filter , best for .21/.12Racing For INS BOX , this one will be the best replacement for the inside filter.

PREÇO : 5.50 Euros

#20060003 Air clean for .12/.21 size engine. Provides high airflow, heavy

PREÇO : 5.50 Euros 21

#20060004

Air clean for .12/.21 size engine. Provides high airflow, heavy

PREÇO : 5.50 Euros 21

duty dust proof.

Fit Picco / OS / SH / FC .12 .15 engine

#20060001
Air clean for .12 and .21
Engine

PREÇO : 5.50 Euros

#20060002
Air clean for .12 small type

PREÇO : 5.50 Euros

Fit Picco / OS / SH / FC .12 .15 engine

Fit on .12 engine

Fit on .21 engine

The BEST Air Clean on R/C Market

   1.Perfect Fit on .12 and .21 Engine without any leak
   2.With anti-oil/heat soft rubber , long lasting and strong.
   3.High-flow and High-density anti-cracking sponge.

The BEST Air Clean OFF-ROAD BUGGY R/C

   1.Perfect Fit on .21 Engine without any leak
   2.With anti-oil/heat soft rubber , long lasting and strong.
   3.High-flow and High-density anti-cracking sponge.

ESPUMAS DO FILTRO DE AR : 5.00 Euros ( 2 unidades )

FILTRO AR COMPLETO : 18.00 Euros

PREÇO : 7.50 Euros

Femeas freadas para 1/8 TT

Para as rodas não desapertar

Ref: 30021701 ............. 5.50 Euros ( 4pcs )

Femeas freadas/fechadas para 1/8 TT

Para as rodas não desapertar

Ref: 30021703 ............. 7.00 Euros ( 4pcs )

#30020020

#30020021

2 mm nylon nut
color:
Blue Red Silver

Preço : 7.00 Euros ( 8 unid. )

2mm nylon nut
with flange
Color:
Blue Red Gold

Preço : 7.00 Euros ( 8 unid. )

#30020030

#30020031

3mm nylon nut
color:
Silver Gold Blue
Red

Preço : 5.00 Euros ( 8 unid. )

3mm nylon nut
with Flange
color: Purple L-blue
Silver Gold Blue Red

Preço : 6.00 Euros ( 8 unid. )

#30020040

#30020041

4mm nylon nut
color: Silver Red
Gold purple Blue

Preço : 5.00 Euros ( 8 unid. )

4mm nylon nut
with Flange
color: L-blue Gold Red
Silver Ti Blue

Preço : 7.00 Euros ( 8 unid. )

#30020050

#30020051

5mm nylon nut
color:L-Blue Siver
Red Gold Purple

Preço : 7.00 Euros ( 8 unid. )

5mm nylon nut
with Flange
color:purple Gold Red
Siver L-Blue

Preço : 7.50 Euros ( 8 unid. )

#30020052

5mm reverse-thread nylon nut
For:HPI savage
Color: Blue

Preço : 8.50 Euros ( 8 unid. )

#30020042

4mm Thin nylon nut with Flange
For:1/10 EP/GP Touring car wheel nut
Color: Blue/Purple

Preço : 7.00 Euros ( 8 unid. )

Anodized Aluminum Washers

	#30030030		#30030040
	3mm anodized aluminum washer color:azul/purple Preço : 6.50 Euros(20pcs.)		4mm anodized aluminum washer color:azul/purple Preço : 6.50 Euros(20pcs.)
	#30030050
	5mm anodized aluminum washer color: Preço : 7.00 Euros(20pcs.)